Correct Installation of Underwater Pool Luminaires
Care must be taken to ensure the design and installation of any underwater lighting product is completed carefully and with the correct methods.
Make local connections in a DRY intermediate location or junction box to avoid the need for abnormally long cables to be factory fitted to luminaire. Ensure your installer has a defined installation and wiring plan and contact the manufacturer in advance in case of any uncertainty.
The end of cables and wiring must not at any time get wet or come into contact with water whatsoever. If retrofitting, all water must be drained completely and the area must be 100% dry
Do not at not at any time operate any submersible-only luminaire outside of cool water. Only after submersion should power be energised.
To maximise lifespan, you should not operate underwater lighting continuously for more than 4-6 hours at any time
Junction box to make suitable intermediate connection between pool luminaire cable and power supply cable
x
water line
Swimming Pool
Electrical Conduit
To controller/ Power supply location
Pool Luminaire
Luminaire Housing (recessed type)
This guide is for generic information purposes only. Please refer to your qualified architect, designer or electrical contractor before finalising any details regarding wiring and installation.
Powered by FlippingBook