SUPERLIGHT FIBER OPTIC LIGHTING - 2021 CATALOGUE

FIBRE OPTIC LIGHTING SYSTEMS

SUPERLIGHT

History Superlight was established in 2007. We offer the widest range of lighting products in Australia and we complete over one thousand projects every year across all states and territories.

What We Do

Superlight partners with its customers to deliver the best lighting products. Specialist areas include education, aged care, hospitality, public-space lighting, medical, residential, retail, office and commercial.

Competitive Advantage Superlight doesn’t just sell products, we manufacture them. This empowers your business with the best matched lighting solutions every time. We have the largest range of stocked items for immediate dispatch, and we offer fast custom made solutions from our factory in Sydney. Value Our value is in our product capability, and in the experience and skills of our people. We understand that no two projects are alike, so our team provides you with the support you need at every level from quote to final installation.

SUPERLIGHT

Correct Installation of Fibre Optic Lighting

Care must be taken to ensure the design and installation of any underwater lighting product is completed carefully and with the correct methods.

Preparation & Terminating of Fibre Cable (Fig. 1)

Carefully cut the fibre to the specified length. The cross section should be perfectly uniform and the cut surface of the fibre should remain flat and square to the light engine. Step 1. Cut fibres using a hot knife tool to ensure a clean and flat. Polish the fibre surface if necessary. Step 2. Peel approx 50-100mm of the PVC jacket of the fiber (not necessary for fibre without any PVC jacket). Take care not to damage the fibre.

Multi Stranded Fibre Installation (Star Field Ceilings etc)

Drill holes into the ceiling panels according to the desired design. Insert the fibre optic strand into the holes (from above) and fix with an epoxy glue. (see Fig.2). Paint or finish the ceiling surface as required. When set, trim the end of the fibre strands to be flush with the ceiling panel, or to any desired length using side-cutters. Prepare the fire harness as required.

Example Fibre Installations

Side glow fibre, correct termination principal, to ensure good uniformity and even illumination effect:

Step 3. Unscrew the (PG) Gland Connector and insert the fiber harness into the connector until the end of the cable is flush with the outer surface of the connector. Screw down the compression gland tightly. Step 4. Insert the prepared fibre connector into the fixing flange of the light engine, hold in place by tightening the lock screw.

End point fibre, single ended termination with fibre optic light fitting (end termination):

This guide is for generic information purposes only. Please refer to your qualified architect, designer or electrical contractor before finalising any details regarding wiring and installation.

SL9865 LED FIBRE OPTIC LIGHTING KIT The Superlight LED fibre-optic kit is suitable for decorative-architectural lighting projects where a low-energy & low maintenance solution is required. Each kit consists of a powerful LED light engine and eighty fibre optic strands. The light engine can be connected to DMX512, DALI or any Superlight LED controller for full function and colour change control.

SUPERLIGHT

SL9840SS LED FIBRE OPTIC LIGHTING ENGINE SL9840SS is an outdoor rated LED light source engine for professional fiber optic lighting projects.

SUPERLIGHT

SL9840SS LED FIBRE OPTIC LIGHT ENGINE SL9840SS is an outdoor rated LED light source engine for professional fiber optic lighting projects. The unit features dynamic automatic illumination modes including automated twinkle wheel with motorised aperture, Available in static colour LED mode or RGB/RGBW configuration. Control is via RF Remote or DMX512. Other control modes such as DALI, Casambi, also available.

SPECIFICATIONS Model:

SL9840SS

Dimensions

335x287x165mm

Power Supply Input Voltage:

240VAC

Power Options:

96W / 150W

Fibre Strand Capacity:

Max 1250 Strands @ 0.75mm

Aperture Size:

20-32mm OD

Aperture Connector: LED Classification: LED Drive Current: Light Source Efficacy:

Nylon Compression Gland Connector (incl)

4 x High Powered XPE-2 LED

650-1350mA

100lm/W

Light Source CRI:

>90Ra

Primary Power Connection: Recommended Ambient Temp:

Pre-fitted AS/NZS Flex & Plug

-10 ~ +55°C

IP Protection Rating:

IP65 Outdoor and Indoor Use

FIBRE OPTIC CONFIGURATIONS

ORDERING INFORMATION SL9840SS-RGB Superlight LED Fibre Optic Light Engine RGB SL9840SS-RGBW Superlight LED Fibre Optic Light Engine RGBW SL9840SS-3000K Superlight LED Fibre Optic Light Engine 3000K SL9840SS-4000K Superlight LED Fibre Optic Light Engine 4000K SL9840SS-6000K Superlight LED Fibre Optic Light Engine 6000K SL9840SS is directly compatible with DMX512. Also supplied with wireless RF Remote Control handset for stand-alone operation. Control parameters inc dimming, colour wheel speed, preset colour programs, animations and more. TYPICAL APPLICATIONS Professional fiber-optic lighting installations, decorative lighting, LED light engine for fiber optic lighting downlights, task lighting, galleries, showcases, remote indoor and outdoor fibre optic lighting, star-field ceilings, automotive lighting, marine lighting pubs & clubs,theatre lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY Customised Fibre loom harness available to order separately. Fibre loom harness can be customised by request. Aperture adaptor options vary 20-32mm diameter. Available in 4x24W or 4x36W LED configurations RGBW / RGB / SINGLE COLOUR OPTIONAL CUSTOMISATION OPTIONS Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

SL9840SS LED FIBRE OPTIC LIGHTING ENGINE SL9840SS is an outdoor rated LED light source engine for professional fiber optic lighting projects.

SUPERLIGHT

SUPERLIGHT CUSTOM FIBRE LOOM HARNESS Professionally terminated, polished and prepared fiber harness custom made for your project. Various configurations possible.

SUPERLIGHT

SL986 4 LED FIBRE OPTIC LIGHTING KIT The Superlight LED fibre-optic kit is suitable for decorative-architectural lighting projects where a low-energy & low maintenance solution is required. Each kit consists of a compact yet surprising powerful LED light engine. Can be fitted with custom loom up to 200pcs x 0.75mm fibres.

SUPERLIGHT

SL9863F262 FIBRE OPTIC LIGHT FITTING SL9863F262 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F262

Dimensions:

As Shown

Construction Material:

Anodised Aluminium & Glass Lens

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8-12mm

Recessed / Inground/ Embedded Exterior

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F262

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

SUPERLIGHT

SL9862W70 Superlight fibre-optic LED engine with high powered LED light source. Integrated active cooling fan and Fiber gland collar. Available in RGB LED, RGBW LED or static WHITE LED configurations

SUPERLIGHT

SL9862W100 LED FIBRE OPTIC LIGHT ENGINE 100W SL9862 Fiber Optical Series is a high powered LED illumination engine with integrated cob led light source. The Light engine can be supplied with passive or active thermal management with on board fan for active cooling. Available in static LED mode or RGB/RGBW configuration. Control is via RF Remote or DMX512. Other control modes such as DALI, Casambi, also available,

SPECIFICATIONS Model:

SL9862W100

Light Engine Dimensions: Power Supply Input Voltage:

288x195x76mm (Excluding Gland Connector)

240VAC

Power Consumption: Fibre Strand Capacity:

100W

Max 1150 Strands @ 0.75mm

Aperture Size:

32mm OD

Aperture Connector: LED Classification: LED Drive Voltage: Light Source Efficacy:

Nylon Compression Gland Connector (incl)

COB LED CXE

1050mA 85lm/W

Light Source CRI:

>80Ra

Primary Power Connection: Recommended Ambient Temp:

Pre-fitted AS/NZS Flex & Plug

-5 ~ +40°C

IP Protection Rating:

IP20 Indoor Use Only

ORDERING INFORMATION SL9862W100-RGB Superlight LED Fibre Optic Light Engine RGB SL9862W100-RGBW Superlight LED Fibre Optic Light Engine RGBW SL9862W100-3000K Superlight LED Fibre Optic Light Engine 3000K SL9862W100-4000K Superlight LED Fibre Optic Light Engine 4000K SL9862W100-6000K Superlight LED Fibre Optic Light Engine 6000K TYPICAL APPLICATIONS Suitable LED light engine for fiber optic lighting downlights, task lighting, galleries, showcases, remote indoor and outdoor fibre optic lighting, star-field ceilings, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY RF Remote Control. Customised control versions available,DMX512, DALI, Casambi PHOTOMETRIC INFORMATION Detailed photometric reports are available by request Superlight can provide wiring schematics and lighting control system design. Contact us for more information. Detailed photometric report and IES files available. Contact Superlight for more information. LM80, LM79 test reports available by request. CUSTOMISATION OPTIONS Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Infinity Squared, Vivid Festival of Light - Superlight Bespoke Electroluminescence light source custom design for public lighting installation at Vivid, Sydney. Superlight provided over 1000 individual EL strands for the project.

SUPERLIGHT

SL9862W75 LED FIBRE OPTIC LIGHT ENGINE 75W SL9862 Fiber Optical Series is a high powered LED illumination engine with integrated cob led light source. The Light engine can be supplied with passive or active thermal management with on board fan for active cooling. Available in static LED mode or RGB/RGBW configuration. Control is via RF Remote or DMX512. Other control modes such as DALI, Casambi, also available,

SPECIFICATIONS Model:

SL9862W75

Light Engine Dimensions: Power Supply Input Voltage:

248x195x76mm (Excluding Gland Connector)

240VAC

Power Consumption: Fibre Strand Capacity:

75W

Max 1150 Strands @ 0.75mm

Aperture Size:

32mm OD

Aperture Connector: LED Classification: LED Drive Voltage: Light Source Efficacy:

Nylon Compression Gland Connector (incl)

COB LED CXE

1050mA 85lm/W

Light Source CRI:

>80Ra

Primary Power Connection: Recommended Ambient Temp:

Pre-fitted AS/NZS Flex & Plug

-5 ~ +40°C

IP Protection Rating:

IP20 Indoor Use Only

ORDERING INFORMATION SL9862W75-RGB Superlight LED Fibre Optic Light Engine RGB SL9862W75-RGBW Superlight LED Fibre Optic Light Engine RGBW SL9862W75-3000K Superlight LED Fibre Optic Light Engine 3000K SL9862W75-4000K Superlight LED Fibre Optic Light Engine 4000K SL9862W75-6000K Superlight LED Fibre Optic Light Engine 6000K TYPICAL APPLICATIONS Suitable LED light engine for fiber optic lighting downlights, task lighting, galleries, showcases, remote indoor and outdoor fibre optic lighting, star-field ceilings, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY RF Remote Control. Customised control versions available,DMX512, DALI, Casambi PHOTOMETRIC INFORMATION Detailed photometric reports are available by request Superlight can provide wiring schematics and lighting control system design. Contact us for more information. Detailed photometric report and IES files available. Contact Superlight for more information. LM80, LM79 test reports available by request. CUSTOMISATION OPTIONS Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Infinity Squared, Vivid Festival of Light - Superlight Bespoke Electroluminescence light source custom design for public lighting installation at Vivid, Sydney. Superlight provided over 1000 individual EL strands for the project.

SUPERLIGHT

SL9863F1272 FIBRE OPTIC LIGHT FITTING SL98631272 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F1272

Dimensions:

As Shown

Construction Material:

Anodised Aluminium with Optic

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8-10mm

Recessed Eyeball Downlight / Joinery /

IP Protection Rating:

IP40

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F1272

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Bangalore Polo Club - Bar & Restaurant Lighting - Christchurch Superlight custom made a full suite of LED lighting for fit out of bar and restaurant. RGB control, professional decorative lighting and full function control system supplied by Superlight.

SUPERLIGHT

SL9863F172 FIBRE OPTIC LIGHT FITTING SL9863F172 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F172

Dimensions:

As Shown

Construction Material:

Aluminium & Crystal Glass Lens

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8mm

Recessed / Ceiling / Star Ceiling

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F172

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Bangalore Polo Club - Bar & Restaurant Lighting - Christchurch Superlight custom made a full suite of LED lighting for fit out of bar and restaurant. RGB control, professional decorative lighting and full function control system supplied by Superlight.

SUPERLIGHT

SL9863F272 FIBRE OPTIC LIGHT FITTING SL9863F272 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F272

Dimensions:

As Shown

Construction Material:

316 Stainless Steel

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8mm

Recessed

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F272

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Infinity Squared, Vivid Festival of Light - Superlight Bespoke Electroluminescence light source custom design for public lighting installation at Vivid, Sydney. Superlight provided over 1000 individual EL strands for the project.

SL9863F252 FIBRE OPTIC LIGHT FITTING SL9863F252 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F252

Dimensions:

As Shown

Construction Material:

Aluminium Alloy & Polycarbonate

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8mm

Recessed

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F252

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Private Residence - Interior and Exterior Lighting Professional interior and exterior lighting for residential project. High quality LED luminaires used throughout. Dimmable configurations and custom made configurations. Lighting design by Superlight.

SL9863F232 FIBRE OPTIC LIGHT FITTING SL9863F232 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F232

Dimensions:

As Shown

Construction Material:

316 Stainless Steel with Tempered Glass

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

16-20mm

Recessed / Inground/ Embedded Exterior

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F232

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Private Residence - Interior and Exterior Lighting Professional interior and exterior lighting for residential project. High quality LED luminaires used throughout. Dimmable configurations and custom made configurations. Lighting design by Superlight.

SUPERLIGHT

SL9863F242 FIBRE OPTIC LIGHT FITTING SL9863F242 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F242

Dimensions:

As Shown

Construction Material:

316 Stainless Steel with Tempered Glass

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

12-18mm

Recessed / Inground/ Embedded Exterior

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F242

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Private Residence, Interior and Exterior Lighting, Cremorne Point Contemporary interior and exterior lighting design by Superlight, recessed and surface-mounted products for feature lighting, accent lighting, general illumination and landscape lighting.

SUPERLIGHT

SL9863F182 FIBRE OPTIC LIGHT FITTING SL9863F182 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F182

Dimensions:

As Shown

Construction Material:

Aluminium & Crystal Glass Lens

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8mm

Recessed / Ceiling / Star Ceiling

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F182

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Vivid Installation - Circular Quay Unique lighting installation completed using Superlight VRX LED profiles illuminating opal acrylic tubes. Designed with variances in length and illumination intensity results in visual centrepiece. Superlight products feature prominently in many Vivid exhibits.

SUPERLIGHT

SL9863F152 FIBRE OPTIC LIGHT FITTING SL9863F152 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F152

Dimensions:

As Shown

Construction Material:

Aluminium & Crystal Glass

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8mm

Recessed / Ceiling / Star Ceiling

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F152

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Infinity Squared, Vivid Festival of Light - Superlight Bespoke Electroluminescence light source custom design for public lighting installation at Vivid, Sydney. Superlight provided over 1000 individual EL strands for the project.

SUPERLIGHT

SL9863F142 FIBRE OPTIC LIGHT FITTING SL9863F142 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F142

Dimensions:

As Shown

Construction Material:

Aluminium & Crystal Glass

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8mm

Recessed / Ceiling / Star Ceiling

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F142

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Private Residence, Newtown. Interior and Exterior LED lighting Superlight inground luminaires provide uplight illumination in this modern architectural interior. Solid marine grade stainless steel with cool-touch glass lens and flush mounting kit. Smooth and powerful LED output with maximum energy efficiency.

SUPERLIGHT

SL9865 LED FIBRE OPTIC LIGHTING KIT The Superlight LED fibre-optic kit is suitable for decorative-architectural lighting projects where a low-energy & low maintenance solution is required. Each kit consists of a powerful LED light engine and eighty fibre optic strands. The light engine can be connected to the Superlight SL5309 controller for full function and colour change control.

SPECIFICATIONS Model:

SL9865 Fibre Optic Kit

Part Number: Input Voltage:

SL9865

10-240VAC

Power Consumption: Number of Fibres: Fibre Strand Length: Fibre Strand Diameter: LED Classification: LED Drive Current: Light Source Efficacy:

6W

80 Strands

2mtr

0.75mm

CREE XPE-LED

12VDC

85lm/W

Light Source CRI:

>85Ra

Beam Angle:

N/A

Recommended Ambient Temp:

-20 ~ +45°C

IP Protection Rating:

IP20

ORDERING INFORMATION SL9865-15 Superlight LED Fibre Optic Kit COOL WHITE 6000K SL9865-21 Superlight LED Fibre Optic Kit WARM WHITE 3200K SL9865-35 Superlight LED Fibre Optic Kit RGB CONTROL & DIMMING COMPATIBILITY This product is available in dimmable configurations including Phase Dim, DALI, 1-10V, DMX512.Please contact us for options and availability. TYPICAL APPLICATIONS Suitable for star-field ceilings, pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting etc. PHOTOMETRIC INFORMATION Detailed photometric reports are available by request Superlight can provide wiring schematics and lighting control system design. Contact us for more information. Detailed photometric report and IES files available. Contact Superlight for more information. LM80, LM79 test reports available by request. CUSTOMISATION OPTIONS Custom star field ceilings and arrangements can be customised by request Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

SL9863F112 FIBRE OPTIC LIGHT FITTING SL9863F112 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F112

Dimensions:

As Shown

Construction Material:

Aluminium & Crystal Glass

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8mm

Recessed / Ceiling / Star Ceiling

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F112

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

SL9863F72 FIBRE OPTIC LIGHT FITTING SL9863F72 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F72 As Shown

Dimensions:

Construction Material:

Anodised Aluminium & Glass Lens

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

10mm

Recessed / Ceiling / Joinery / Downlight

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F72

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

SL9863F72 High quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult.

SUPERLIGHT

SL9863F62 FIBRE OPTIC LIGHT FITTING SL9863F62 is a high quality fibre optic end fitting compatible for use with Superlight fibre optic lighting systems and light engines. The fitting is ideal for scenarios where service access will be technically difficult. Custom fibre optic fittings can be made to order by Superlight to suit any project. Several sizes available.

SPECIFICATIONS Model:

SL9863F62 As Shown

Dimensions:

Construction Material:

Anodised Aluminium & Glass Lens

Termination:

Rear Entry

Fibre Compatibility:

Solid Core, Multi Stranded, UV Sheathed

Aperture Size: Mounting Type:

8mm

Recessed / Ceiling / Joinery / Downlight

IP Protection Rating:

IP68

PHOTOMETRIC INFORMATION Photometric performance is dependant on configuration of a suitable remote mounted light engine.

TYPICAL APPLICATIONS Fibre optic lighting is ideal for remote access downlights, spotlighting, task lighting, galleries, museum showcases, remote indoor and outdoor fibre optic lighting, ceilings, wall features, special effects, theatre and television effects, automotive lighting, marine lighting pubs & clubs, decorative lighting, gaming lounges, animated display boards, special effect lighting CONTROL & DIMMING COMPATIBILITY (LIGHT ENGINE) Control is determined by remote mounted light engine. Available options include;RF Remote Control, DMX512, DALI, Casambi

ORDERING INFORMATION SL9863F62

Superlight Fibre Optic Light Fitting

Customised fibre optic cabling systems and accessories available. Custom made fibre kits can be supplied as required Individual fibre optic cable runs to specified lengths available by request Contact Superlight for assistance with specifying or ordering fibre optic lighting CUSTOMISATION OPTIONS SL9863 series fibre optic fittings can be anodised, coated or refinished according to specific request. Superlight can design and supply custom fibre optic lighting solutions as required >> Custom options may be subject to minimum order quantities

All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.

SUPERLIGHT

Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963

WWW.SUPERLIGHT.COM.AU

Infinity Squared, Vivid Festival of Light - Superlight Bespoke Electroluminescence light source custom design for public lighting installation at Vivid, Sydney. Superlight provided over 1000 individual EL strands for the project.

SUPERLIGHT

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58

superlight.com.au

Powered by