Gerneral mounting
LED Flexlite can be fastened to surfaces using appropriate accessories available from distributor. Please refer to data sheets or contact technical support for a copy. The use of glues and resins as fixing agents should be avoided. Use of glues and resins may invalidate the warranty of the product, unless it’s use is agreed in writing by distributor as part of a detailed project specification. The images indicate one type of fixing available in the accessories range. The different fixings serve obvious purposes, however when in doubt technical support should be contacted. Quantities of accessories and fixings are dependent on the type and its effect on the variant it’s being used with. Care should be taken to ensure drooping is avoided, and to ensure that is fastened adequately to avoid stresses on itself. The aluminum mounting piece of IP67 front connector and end cap should keep at least10mm space apart from aluminum channel when making installation.
Aluminum profile
Screw
Installation surface (Wood or concrete wall)
>100m m
>10mm
>10mm
Press the flex light into mounted aluminum channel in one direction.
Installation direction
Do not bend against light terminals; otherwise it will lead to failure of connector waterproof.
Incorrect installation like below picture could lead to light failure.
Installation direction
Installation direction
<100m m
Ensure the feeding cable not bear force, keep the head10mm in natural loose. >10mm
Pull
Mount the cable junction in hermetic enclosure like waterproof junction box in outdoor application.
Waterproof connector or junction box
Power Supply
7
Powered by FlippingBook