SL7600-BATT BATTERY ENABLED LED STRIP KITS Superlight battery-powered LED strip lighting kits are configured to order, with the LED strip length, output and function tailored to each individual project. They enable clean, reliable illumination wherever hard-wiring to 12VDC or 24VDC mains is not possible, practical or cost-effective — removing the need for an electrician, cable runs or a nearby power point. Used across hundreds of different applications, each kit can be built in a range of LED configurations, strip sizes, colour temperatures and brightness levels to suit the job. Optional dimming controllers with remote handsets allow brightness, function and on/off settings to be adjusted easily, making the kits a flexible, retrofit-friendly lighting solution. SPECIFICATIONS Input Voltage: 4.5V Power: 5-10W Per Mtr Max Recommended Length: 5mtr (Longer Runs by Parallel) PHOTOMETRIC INFORMATION Photometric performance varies depending on final LED configuration specified. Contact Superlight for more information TYPICAL APPLICATIONS Display cabinets, retail merchandising units and point-of-sale stands, exhibition and trade-show stands, event, hospitality and temporary installations, joinery, cabinetry, wardrobes and under-shelf lighting, signage and lettering illumination, heritage and listed buildings where cabling cannot be installed, market stalls and pop-up retail, photography and film lighting, outdoor and remote locations without mains access, caravans, marine and recreational vehicles, emergency and backup lighting, artwork and gallery accenting, and any architectural, decorative or task-lighting application where running mains cable is impractical or undesirable.
OPTIONAL WIRELESS CONTROL WITH RF REMOTE HANDSET 4 key IR Remote
Control. Button button
ON/OFF
Brightness : +8
Level ; -8
Level
(Brightness
+/-
Dynamic Retains
Functions:
"FLASH"
"STROBE""FADE"
"SMOOTH
FADING"
prior
colour
or
dimming
level
setting.
ORDERING INFORMATION
SL7600-BATT SMD LED STRIPLIGHT KIT STATIC ON;OFF SL7600-BATT(RF) SMD LED STRIPLIGHT KIT WITH REMOTE CONTROL HANDSET
CUSTOMISATION OPTIONS Can be IP67 encapsulated by special request (Please note; IP67 encapsulation increases overall width and thickness) Factory prepared custom lengths are available by request Multiple RGBW or single colour LED configurations are available Several interconnecting options for seamless connections Different battery pack sizes can be offered depending on LED load and operation Lengths can be continuous interconnected up to 5meters by special request (subject to minimum order qty) Custom made sets by request
All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.
SUPERLIGHT
Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963
WWW.SUPERLIGHT.COM.AU
Powered by FlippingBook