Examples of mode settings for static colour output:
RF Remote Control Handset For new RF remote handsets (eg in the event of replacement remote handset) the new handset must be first initially paired to the controller. To pair the remote handset; long press ON/OFF button on the controller, after the indicator light flashes, press pause key on the remote control, when the light flashed again.
RGBW CONTROLLER
W
OUTPUT: 5A×4CH
INPUT: DC12V-24V
Four (4) analogue dials are included which can each manually control individual channels on the controller. When operating the rotary dials, the digital LCD displays the corresponding channel brightness value (0-255 scale) When accessing a built in mode via the remote handset, the LCD will indicate the current mode, speed and brightness
Handset Battery: Remote handset requires 1 x battery (available seperately, battery not included)
RF Remote Handset - Description of Operations:
Static red
Sign
Description ON/OF: Turn on/off the controller
Button
Static green
ON/OFF
Any button can start the controller at off status PAUSE: Press this button will rest at current color, press it again, will continue to change. Mode+ ： Press this button to select next mode . Hold the button for 3 seconds, when the led flashes three times, the controller enters into cycle mode. Mode- ： Press this button & back to previous mode. Hold the button for 3 seconds, when the led flashes three times, the controller enters into cycle mode. Speed+ ： Press this button to select 1-16 speed changing levels, speed up. Hold the button for 3 seconds, when the LED flashes 3 times, it indicates the speed of all modes have been reset to default. Speed- ： Press this button to select 1-16 speed changing levels, speed down. Hold the button for 3 seconds, when the LED flashes 3 times, it indicates the speed of all modes have been reset to default. BRT+ ： Press this button to select 1-16 brightness adjustment levels. Brightness up. Hold the button for 3 seconds, when the LED flashes 3 times, it indicates the brightness of all modes have been reset to default. BRT- ： Press this button to select 1-16 brightness adjustment levels. Brightness down. Hold the button for 3 seconds, when the LED flashes 3 times, it indicates the brightness of all modes have been reset to default.
PAUSE
PAUSE
Static blue
MODE
MODE+
Static white
MODE
MODE-
SPEED +
Dynamic mode:
SPEED
SPEED-
SPEED
Mode 4 Speed level 10 Brightness level 6 When there is an error state including overload or short - circuit , the controller will automatically shut off and the LCD display may indicate ER R , as per below example :
BRT+
BRT
BRT-
BRT
Resolving the overload or short-circuit condition will usually restore the controller to normal operation. Warning: prolonged over-load or short circuit will risk permanent damage.
Built in Programs (Modes):
C5304RF features 37 built-in dynamic modes which can be accessed by using the mode keys on the RF handset. By operating Mode+ / Mode - the controller will a scroll to the next model in accordance with the table below.
Mode No.
Mode No.
Remark
Model
Remark
Model
Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable All recycling
Cyan fading White fading RGB fading
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
DIY static color Static red Static green Static blue Static yellow Static purple
1 2 3 4 5 6 7 8 9
Brightness adjustable Brightness adjustable Brightness adjustable Brightness adjustable Brightness adjustable Brightness adjustable Brightness adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable
Red green smooth Red blue smooth Green blue smooth Red yellow smooth Green cyan smooth Blue purple smooth Red purple smooth Green yellow smooth Blue cyan smooth Red white smooth Green white smooth
Static cyan Static white
3 color skipping 7 color skipping White strobe 3 color strobe 7 color strobe White speed-up strobe Red fading Green fading Blue fading Yellow fading Purple fading
10 11 12 13 14 15 16 17 18 19
White strobe increasingly
Blue white smooth
Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable Brightness, speed adjustable
Yellow purple cyan smooth
Full color smooth Cycle mode
Warnings & Use Guidelines
Electrical and lighting installation must only be carried out by suitably qualified electrical installer. Test all devices in a controlled environment first. Ensure there is strong familiarity will all components and functions before commencing installation. Only use this controller with an approved 12VDC or 24VDC constant voltage power supply. Do not overload the controller and ensure correct wiring polarity at all points throughout the installation Isolate all power before installation and during wiring & connection C5304RF contains no user serviceable components and should not be used if damaged in any way. IP20 for indoor use only.
All product specifications are subject to change without notice. Superlight accepts no liabilities as a result of errors, updates or omissions. Please re-confirm all product details prior to ordering.
SUPERLIGHT
Sales Rep: 0480 015 518 Sales Rep: 0480 031 109 Toll Free: 1300 344 963
WWW.SUPERLIGHT.COM.AU
Powered by FlippingBook