SX C 300 CONNECTION EXAMPLE
< Applications
< Packing List
SL001C
LED light Strip
A2507
SL001B
A Sensor
SL001A
24V Power input (12-24VDC)
T-shape cable
B Sensor
Connect to Bus Control of Whole Step Wires
< Notice of installation
The cables of the main control should avoid short -circuit and connecting the wrong cables. Our products have been protected, mainly because users can avoid this situation when using other manufacturers' led strips, otherwise it may be possible to burn the strips. In case of this situation, it is usually eliminated by cutting the first pixel of the cutting led strips to advoid the failure. When cutting at the end of the main cable of the T -type, it should be avoided short -circuit. It is recommended to cut it obliquely and wrap it with waterproof tape. Please ensured that the signal flow is consistent with the flow direction marked on the cable when you install the T -type cable, otherwise the system will not work.
The maximum current of the entire system and stair lights cannot exceed the specified value.
SUPERLIGHT
Powered by FlippingBook