Screw [x4]
Front connector [x1]
Anti-skidding clip
Rubber gasket
Aluminum mounting piece
finished assembly view
[x1]
[x1]
[x1]
Step 1 Place the anti-skidding clip on the very end of the tubing with the 2 tiny tabs that are pointing inwards still touching the end of the material and crimp in place. Step 2 Line up the alumimum mounting piece so the screw hole face the plug and slide on over the anti-skidding clip. Step 3 Insert the rubber gasket along with slit into the pin of the front connector, put 100% clear silicone on the surface of the rubber gasket. Step 4 Carefully insert thhe pins of the front connector into the gap created behind the FPCB. Step 5 Srew the front connector to the aluminum mounting piece
Step 1
Step 2
Step 3
Step 4
Step 5
Screw [x4]
Blank End [x1]
Anti-skidding clip
Rubber gasket
Aluminum mounting piece
finished assembly view
[x1]
[x1]
[x1]
Step 1 Place the anti-skidding clip on the very end of the tubing with the 2 tiny tabs that are pointing inwards still touching the end of the material and crimp in place. Step 2 Line up the alumimum mounting piece so the screw hole face the plug and slide on over the anti-skidding clip. Step 3 Apply 100% clear silicone onto the end face of led Flexlite Step 4 Place the rubber gasket squarely onto the end face of led Flexlite . Step 5 Srew the blank end to the aluminum mounting piece.
Step 1
Step 2
Step 5
Step 3
Step 4
Powered by FlippingBook