Rubber gasket [x2]
Interlink board [x1]
Anti-skidding clip [x2]
Steel Joiner bracket [x1]
finished assembly view
Step 1 Place anti-skidding clip onto both end of the Flexlite , pay attention to its direction.
Step 2 Put rubber gasket on both side of interlink board, then insert interlink board into the gap created behind the FPCB. Step 3 Align the anti-skidding clip with the joiner bracket and press the Flexlite downwards at the same time till bottom, Step 4 Now push each Flexlite in towards the center of joiner bracket, locking tabs on both grip clips click into place within their respective openings in the steel joiner bracket
Step 1
Step 2
Step 3
Step 4
Rubber gasket [x2]
Interlink board [x1]
Anti-skidding clip [x2]
Steel Joiner bracket [x1]
finished assembly view
Step 1 Place anti-skidding clip onto both end of the Flexlite , pay attention to its direction.
Step 2 Put rubber gasket on both side of interlink board, then insert interlink board into the gap created behind the FPCB. Step 3 Align the anti-skidding clip with the joiner bracket and press the Flexlite downwards at the same time till bottom, Step 4 Now push each Flexlite in towards the center of joiner bracket, locking tabs on both grip clips click into place within their respective openings in the steel joiner bracket
Step 2
Step 1
Step 3
Step 4
Powered by FlippingBook