FLEXIBLE LED LIGHTING - CATALOGUE

7. Electrial Connections

LED Flexlite is manufactured to order, meaning that the appropriate power feeds are moulded. There are two options available for all versions, these are bare end cables or plugs. Bare end cables come with a standard length which can vary pending the manufacturing process, therefore it is recommended to ensure the feeder cable is long enough to reach the cable entry point of flex, where connections can be made.- Plugs are designed for “plug-and-play” type installations, whereas the installer would ensure female sockets are available at each flex start location, with the male type connector then plugging into this female type socket. Female sockets are available as separate items.

Bare wire

Plug

Note that custom feed cable lengths are available upon special request.

LED Flexlite is a high-powered product, which requires a detailed electrical design to ensure equal balancing of loads across drivers and power supplies. Reference can be made to the various data sheets for specific variants, that indicate the operating voltage and the wattage per metre. Technical support is on hand to assist with control and power design. Product operates at 24Vdc unless otherwise stated in specific data sheets or product labels. Care should be taken to ensure the operating voltage is constant (constant voltage). A maximum volt drop of 5% is allowed (for example at 24Vdc, the maximum voltage drop would be 1.2V meaning a delivered voltage of 22.8V to the fi xture. Providing with an extensive range of power supplies, LED Drivers, SPI pixel gateways and various DC-DC transformers which allow installers to overcome volt drop issues, as well as various control options such as stand-alone DMX interfaces to multi-universe video matrix type products. We also has an in-house design and engineering team that can deliver such systems, please contact support for more information. Below is a guide which indicates the number of cores and the connections they relate to. Each manufactured length of flex will have a factory fitted label which indicates the correct cores to use, as well as the colour of each specific core and its associated connection. The below guide is in black and white for clarity, and reference should always be made to the label on the product itself as sometimes, the cable colours may vary pending manufacturing processes or for custom orders. If in doubt, or if the label is missing, contact support for assistance before connecting to power.

Direct entry Connector

Side entry Connector

Bottom entry Connector

RGBW

RGB

Mono

Red - Red

Green - Green

Red - Red

Red - 24V+

Black - Blue

Green - Green

White - White

Black - Blue

Yellow - 24V+

Black - Gnd

Yellow - 24V+

Dynamic Pixel DMX -1

Turnable White

Pixel SPI

Red - 24V+

Red - 24V+

Yellow - Data

Red - 24V+

Yellow - Data

Green - Address

Yellow - Warm white

Black - Gnd

Black - Gnd

Black - Cold white

Dynamic Pixel DMX -2

Red - 24V+

Yellow - DMX +

Green- Address

White - Gnd

Blue - DMX-

Powered by